After a Windows computer starts up, each fellow member of a specific group of programs on the computer is launched as soon as the user logs in to Windows. These "startup items" range from tertiary-party programs installed by the user that are configured to launch at startup to congenital-in Windows programs that the system needs to be running when information technology boots upwards. Windows is an Operating Organisation that hands over complete command of a computer to its user. That being the instance, Windows users as well have authority over what programs get-go running at startup and which ones exercise not.

Windows users sometimes demand to terminate certain programs from running at startup for a wide variety of reasons (from the target program being malicious or otherwise dangerous to the target programme eating up a lot of computer resources later it is launched at startup to everything in betwixt). Thankfully, preventing a program from running at startup on a calculator running on Windows seven is fairly easy. Yet, there are three different methods a Windows 7 user tin get about preventing a programme or application on their computer from running at startup.

These three methods are also to exist used in succession until one of these methods manages to fulfill the objective. For example, if the kickoff method doesn't work, but then should you move on to the second method and and so the 3rd method until you successfully preclude the target plan from running at startup. The following are the 3 methods being talked well-nigh:

Method ane: Deleting the program's shortcut from the Startup folder

Virtually third-party programs that are configured to launch at startup have a shortcut in theStartupbinder of a Windows computer. Deleting this shortcut from theStartupfolder results in Windows non launching the program at boot. On Windows 7, here's what you need to do in order to delete a program'due south shortcut from theStartupfolder to prevent it from running at startup:

  1. Open theFirst Bill of fare.
  2. Click onAll Programs.
  3. Locate and click on theStartupfolder to aggrandize it.
  4. Wait for a shortcut to your target program or application nether theStartupfolder. One time y'all locate the shortcut, right-click on it and click onDelete.
  5. Confirm the action in the resulting popup.
  6. Restartyour computer and check to make sure the plan doesn't launch when the estimator boots upward.

Method 2: Disable the startup detail in System Configuration

If deleting the target plan's shortcut from theStartupfolder doesn't work or if you detect that a shortcut for the target programme doesn't even exist in your computer'sStartupfolder, fearfulness not – it is still entirely possible for yous to disable the target plan or "startup item" fromSystem Configuration.Organization Configurationis a Windows utility designed to allow users to configure how their computer starts up and shuts down, among an assortment of other things. To disable the target "startup detail" inSystem Configurationto prevent the target program from being launched at startup, yous demand to:

  1. Press theWindows Logokey +R to open aRundialog.
  2. Typemsconfiginto theRundialog and pressEnterto launch theSystem Configurationutility.
  3. Navigate to theStartuptab of theSystem Configurationutility.
  4. Locate the plan Windows from launching when your computer starts upward, anddisableinformation technology by unchecking the checkbox located straight next to information technology.
  5. Click onApplyand then onOK.
  6. Click onRestartin the resulting dialog box.
  7. When the calculator boots up, bank check to make sure Windows doesn't launch the program you just disabled inSystem Configuration.

Method iii: Prevent the offending program from launching at startup using the Registry

Apart from theStartupbinder on your computer andSystem Configuration, theRegistryalso has the power to get Windows to launch certain programs at the startup. That being the example, yous can simply preclude some programs from launching at startup if you lot do so via the Registryon your computer. Make sure to back up your Registry before trying to edit it in case something goes wrong. To forbid a program from being launched at startup using the Registry, simply:

  1. Commencement the registry editor.
  2. Press theWindows Logokey +R to open aRundialog.
  3. Typeregeditinto theRundialog and printingEnter to launch theRegistry Editor.
  4. In the left pane of theRegistry Editor, navigate to the post-obit directory:
    HKEY LOCAL MACHINE > SOFTWARE > Microsoft> Windows > CurrentVersion
  5. In the left pane of the Registry Editor, click on theRunsub-fundamental under theCurrentVersionkey to take its contents displayed in the right pane.
  6. In the right pane of theRegistry Editor, you are going to see listings for all of the programs on your computer that are configured to exist launched at startup through theRegistry. Locate the listing for the plan y'all want to prevent Windows from launching at startup, right-click on it and click onDelete.
  7. Confirm the action in the resulting popup.
  8. Close theRegistry Editor.
  9. Restartyour computer. At startup, check to ensure that Windows does not automatically launch the programme yous simplydisabledfrom existence launched at startup.

Note: Deleting a program or application'south entry from theRunsub-cardinal in theRegistry Editoronly prevents the program from existence launched at startup – it does NOTuninstallthe program from your computer.

Method 4: Adjusting in MSConfig

It is possible in some cases that the plan that you are trying to terminate from running or launching at your figurer's startup has besides installed a service on your calculator that automatically overrides any restrictions that you implement and allows the plan to be launched at the startup. Therefore, in this step, we will be adjusting this in the MSConfig window. For that:

  1. Printing "Windows" + "R" to open up the Run prompt.
  2. Type in "MSConfig" and press "Enter" to open the Microsoft Configuration Window.
    msconfig
  3. In the Configuration Window, click on the "Services" panel and scroll through the list of mentioned services.
  4. From this, endeavor to disable a service that seems relevant to the application that y'all are trying to disable.
  5. After doing so, hit the "Apply" button to ostend that the service is disabled.
  6. Bank check to meet if the plan still launches.

Method 5: Delete Registry Startup

In some isolated cases, there is another registry where the program that is launching at startup might have manifested its startup command. This registry entry can sometimes comprise the command to launch a particular application at startup and in this step, nosotros volition be getting rid of the entry to brand sure that the awarding isn't launched. In lodge to practice and so, make certain to support the registry beforehand in case something goes south.

  1. Press "Windows" + " "R" on your keyboard to open up the Run prompt.
  2. Within the Run prompt, type in "Regedit" and press "Enter" to launch the registry editor.
    Open Regedit
  3. In the Registry Editor, navigate to the beneath mentioned location.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupreg
  4. From here, on the correct side, you lot should come across a registry entry for any programs that are currently enabled to run on your figurer'southward startup.
  5. Right-click on their entries and select the "Delete" push button to remove them from your computer.
  6. Bank check to see if doing so has fixed the outcome.

Method 6: Disable Startup Programs Using CCleaner

Sometimes, your calculator's configurations might be so messed upwardly that in spite of trying all the fixes above, you would not be able to disable the program that you want from launching at startup. Therefore, sometimes, yous will take to go for a tertiary-party solution to completely forbid whatsoever program from launching at your computer'southward startup. In social club to practice so, follow the guide below.

  1. Outset of all, what yous desire to exercise is launch your favorite browser and download the CCleaner program from hither.
  2. After downloading this tool, make certain to press the executable icon and follow through with the on-screen instructions to install information technology on your figurer.
  3. Subsequently the installation procedure is completed, launch the awarding on your figurer.
  4. After the awarding has been started, click on the "Tools" button at the left side of the dialogue box and select the "Startup" button after that.
  5. The "Enabled" column on the left should be list the programs that are currently enabled to launch at your calculator's startup.
    Clicking on the enabled cavalcade
  6. Click on the program that you want to disable from the list and and so click on the "Disable" button to prevent it from launching at startup.
  7. After disabling all the preferred programs, restart your calculator to make sure that the change takes effect.
  8. Check to see if by doing so you take been able to disable the programs.

Method 7: Check Application Settings

In some cases, nosotros have seen that the awarding in question is configured to launch at startup through its ain settings. This option is commonly presented when y'all first install the application and if y'all don't alter the default "Launch at Startup" pick, the awarding becomes configured to launch at startup. Due to this, even though y'all are trying to forestall it from starting by irresolute the computer configurations, it will still override these settings to suit to your preference. Therefore, a wise workaround to this would be to check your application settings in detail to disable whatever launch at startup setting.

Method 8: Using Selective Startup

Some users were going through the issue that their reckoner was unable to function and they were unable to move even the cursor when the calculator was starting up because a particular awarding was breaking down the operating arrangement and causing information technology to hang up. Therefore, in this step, we will exist booting the calculator into a selective startup style and this way, you will exist able to properly diagnose which application is causing this effect then disable it from launching at startup. For that:

  1. Press "Windows' + "R' to open the Run prompt.
  2. Type in "msconfig" and press "enter" to launch the Microsoft Configuration panel.
    msconfig
  3. Inside this panel, click on the "Kick" selection, and from here brand sure to check the "Safe Kicking" option and later that, select the "Minimal" push.
    Cheque Safe Mode in Boot Tab
  4. Click on the "Employ" push button to salvage your changes and then click on the "OK" button to exit out of the window.
  5. Restart your computer to really boot into the selective startup mode.
  6. This manner won't permit any extra application to beginning up and yous should be able to easily diagnose and gear up your computer.
  7. Check to see if doing and so has fixed your effect.

Annotation: We don't recommend leaving your computer in selective startup, because this can render portions of your security software or other applications unavailable. Once you have determined which program is causing the trouble, you should check the program'due south documentation or help site to meet if the plan can be configured to avert the conflict.

Method nine: Disable Startup Programs Using iSumSoft System Refixer

Once over again, if you are unable to perform any of the steps that we have mentioned below, a convenient and decent approach would be to utilize the iSumSoft System Refixer tool to actually become through this whole ordeal for yous. In order to demonstrate this, nosotros take listed the steps below.

  1. Launch your favorite browser and download the iSumsoft Arrangement Refixer on your calculator from here.
  2. Afterward the download is finished, click on the executable to launch its installer and follow the on-screen instructions to install it on your computer.
  3. Select the Startup option on the top of this tool and it will display a list of all the programs that have been configured to launch at startup on your figurer.
    Clicking on the "Startup" tab
  4. Click the 'Disable get-go' button to disable your unwanted startup programs.
  5. Salve your settings and cheque to see if doing so has gotten rid of your outcome.

Method x: Disable Startup Application Using Shift Primal

If y'all aren't comfortable with any third-political party applications and actually want to perform these steps conveniently at the press of a push, you can just printing and agree the Shift key during the startup process of the reckoner. This volition prevent whatever programs from existence able to run after the startup.

On some computers, you need to press and agree the shift key while restarting your computer to really launch it without having whatever startup programs enabled so brand sure that yous try both these methods and see which one works the best for you.

  • %SystemDrive%\Users\username\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
  • %SystemDrive%\ProgramData\Microsoft\Windows\Start Carte du jour\Programs\Startup

As we discussed in a higher place, the folders above contain the list of the programs that are to be launched at the startup of the computer and whenever the user cues the startup, the system goes into these locations to check for the listing only when you printing the Shift key, this process is skipped and y'all are able to bypass that list. In order to exercise this:

  1. Log off the computer so log on over again, Immediately printing and concur down the Shift key equally the computer starts.
  2. Continue to hold downward the Shift fundamental until the desktop icons appear.
  3. Next, you should apply the Organisation Configuration utility to temporarily disable applications one by one until you identify the crusade of the trouble.
  4. With the crusade of the problem identified, you tin can ready the application or permanently remove it from your startup programs.
  5. Check to see if this method works and yous are able to prevent the app from starting.